Battery sizing for a stand alone passive wind system using statistical techniques

Author: Jamel Belhadj, Malek Belouda, Xavier Roboam, Bruno Sareni
Publisher: Institute of Electrical and Electronics Engineers (IEEE)

ABOUT BOOK

In this paper, an original optimization method to jointly determine a reduced study term and an optimum battery sizing is investigated. This storage device is used to connect a passive wind turbine system with a stand alone network. A Weibull probability density function is used to generate different wind speed data. The passive wind system is composed of a wind turbine, a permanent magnet synchronous generator feeding a diode rectifier associated with a very low voltage DC battery bus. This study is essentially based on a similitude model applied on an 8 kW wind turbine system. Our reference model is taken from a 1.7 kW optimized system. The wind system generated power and the load demand are coupled through a battery sized using a statistical approach

Powered by: